Tileria

Walk-in Shower Tile Calculator & Layout Planner

Plan curbless walk-in shower floor tiling with precise drainage slopes, linear drain cuts, and non-slip format comparisons.

Loading calculator...

Tile Size Comparison (Based on 2.16 m² Room)

Informative reference calculation comparing popular tile sizes for this room.

FormatNet TilesTotal (+10% Waste)Boxes to BuyTrade Rationale
5 × 5 cm Mosaic864 tiles950 tiles10 boxes (100/box)Conforms perfectly to multi-directional drainage slopes without diagonal envelope cuts.
60 × 30 cm12 tiles14 tiles2 boxes (8/box)Aligns flush with the linear channel drain along the first tile course, enabling a clean single-direction drainage slope.
60 × 60 cm6 tiles7 tiles2 boxes (4/box)Expansive modern format; when paired with an aligned linear channel, water flows across a single planar slope.

Craftsman Trade Advice

Essential technical rules from master tilers for durable tile installations.

Substrate Prep

Sloped Screed & Waterproofing Membrane

Shower wet floors require a continuous 2% slope (2 cm per meter) toward the drain. Apply two coats of liquid waterproofing slurry over sealing tapes at all wall-floor junctions before setting tiles.

Sightline

Align Channel Drain with Tile Grid

Position your linear channel drain so tile grout lines align symmetrically with drain edges. Avoid narrow slivers under 5 cm along glass shower partition channels.

Joint Physics

Epoxy Grout & Perimeter Expansion Joints

Use chemical-resistant epoxy grout in shower wet zones to eliminate mold and water seepage. Caulk perimeter wall transitions with 100% silicone over foam backer rod.

Frequently Asked Questions

How much tile waste should I calculate for a walk-in shower floor?
Calculate 15% cutting waste for walk-in shower floors. Mitered envelope cuts across slope breaks and perimeter cuts around drain channels create significantly more scrap than standard flat floors.
Which tile size makes a walk-in shower feel larger and more open?
Large 60×30 cm tiles extending into curbless showers visually expand the floor. Aligning a linear drain flush with the first tile line enables a clean single-plane slope with zero diagonal envelope cuts; ensure an R11 slip rating.
Should walk-in shower floor joints align with the main bathroom floor?
Continuing the bathroom floor joint lines directly into curbless walk-in showers creates an expansive spa feeling. Ensure the linear drain body is leveled flush with the incoming tile elevation.
How do I tile around a walk-in shower drain channel?
Leave a 3 mm silicone expansion gap between the stainless steel drain trim and surrounding tiles to absorb thermal movement, filling the joint with mold-resistant sanitary silicone.

Explore Related Tile Calculators

Calculate material requirements for related room shapes, spaces, and tile dimensions.